Bearing Puller
Automotive Tools
- Wheel Bearing Removal Tool
- Ball Joint Separator
- Brake Caliper Tool
- Oil Filter Wrench
- Coil Spring Compressor
- Injector Puller
- Bush Tool
- Altermator Puller Puller
- Engine Timing Tools
- Clutch Alignment Tool
- Engine Compression Tester
- Engine Repair Tools
- Injector Seat Cutter
- Mechanic Creeper
- Oil Drain Plug Key Tool
- Fluid Oil Extractor
- Brake Bleeder
- Fuel Tank Wrench
- Wiper Arm Puller
- Motorcycle Chain Breaker
Truck Repair Tools
Mechanic Tools
Plastic Auto Tools
DNT product instruction: brake caliper tool set 18 pc DN-B1009
brake caliper tool set 18 pc DN-B1009
Features:
● For use on most domestic and import 2WD & 4WD vehicles
● Use on front or rear brakes
● Use on main brake and parking brake systems
● Prevents damage to brake piston and boot
Operating Instructions
● This service kit will work with most model vehicles. See the paarts list for a description of which
components will work with your make and model.
● Read the vehicle owner's manual to determine which Discand Thrust Bolt to use.
● Raise and safely secure vehicle.
● Remove the wheel and brake caliper.
● Remove the worn brake pads and hardware.
● Service the caliper according to the vehicle manufacturer's instructions.
● Move the T-handle of the Thrust Bolt to one side and slicde the plate over the T-handle then down the Thrust Bolt, until it rests on the shoulder of the bottom of theThrust Bolt. Apply the correct Disc to the two pegs on the bottom of the Thrust Bolt (the magnet willI hold it in place).
● According to the vehicle manufactures instructions, screvw the piston into the caliper.
● Reassemble caliper, brake pads and wheels.
Note: Test the brakes thoroughly before use.
● Clean and store the service kit indoors out of children's reach
|
ITEM |
PART DESCRIPTION
|
1 | 2-1/2'SinglePinDicsforGeneralMotors79Seville,EIDorado PRT5165-02 Plate |
2 | 2-1/64°ThreePinDiscforCitroen/XM.Xantia(F/R) |
3 | 2-5/32-No Pin Disc for Audi(F),Fiat Alfa Romeo(F),Ford Fiesta(F),Honda Concesto(F),Jaguar XJ6,XJ40(F/R),BMW 318is,320i,325TD,518i,1x,740i,850ci M5(F), Mitsubishi Colt(F), Nissan Miera,5Stanza,Sunny(F),Range Rover,Austin, |Me tro,200&400 Series,Maestra,Montego(F),Toyota Camry(F),Volvo(F),W Passat,Golf,GTI(F) |
4 | 1-1/4' Two Pin Disc for Ford AU&NZ,Testar,Laser(R),Mazda(R),Saab 9000(R), Fiat/Alfa Romeo 1642(R),honda Prelude,CRS,16l,GM Satum,Grand Prix, |
5 | 3/8°Adapter |
6 | 1-21/32'TwoPinDiscforAudi80,90,V8100.CoupeE(R),RangeRover800, Subaru L,Z(R),Ford Siera,Granada,Scorpio(R),Nissan Bluebird,Silvia,Primera, Peugeot 405,1.9Gi,Gro,Sri,Gtxi,MI,2.0Sri(R),Toyota Celica Corolla,GT,MR2(R), VwGolfGT.Jetta.Syncro.Jeta GTIPassat CL, GL. GT. Corrado,Sciroca.GTX |
7 | 1-21/32°TwoPinDiscforNissanPrimera.WWGolfIV |
8 | 1-7/8'SinglePinDiscforGeneralMotors |
9 | 2-1/8°Single Pin Disc for GeneralMotors,Cafillac Seville&EIDorado |
|
A
|
1-3/16°TwoPinDiscforRenaultR21.Lagura
|
E | 1-21/32°FourPinDiscforCelfiroMaxima |
F | 1-1/4° Two Pin Disc for Opal |
|
L
|
Left Hand Thrust Bolt
|
K | 2-1/8' Two Pin Disc for Citrroen C5 |
M | 1-1/4' Two Pin Disc for Ford |
N | 1-1/4'Hex Disc for Saab,Honda R |
|
R
|
Right Hand Thrust Bolt
|
|
19
|
Blow Molded Case
|
Are you looking for a reliable manufacturer of down home textile products?
We can quickly provide customers with market analysis, technical support and customized services.
- Ningbo Dongning Tools Co.,Ltd
- Professional Chinese Tools manufacturer on hand tools& automotive tools
- Address
- No.6 Falan Rd,Hengjie Town,Ningbo City,Zhejiang,China
- Phone
- 86-574-88298696 / 86-574-87070383
- info@nbdntools.com
subscription