The discs go from 18mm (25/32) all the way to 65mm (2- 9/16”) in 1mm increments plus 2-29/32” 74mm All discs are connected with a 12mm shaft and screw which quickly connects to a 180mm 7 ½” handle
Can remove or install bushings that are flush with the housing
All you do is select the required sizes.and assemble your custom driver.
-select the components or sizes
- Assemble the drive tool.
- Strike the tool and do the job. All discs are fully interchangeable with the TE9013 jumbo seal kit With a regular bushing driver you have to have the exact size in your kit or you can't do the job. Most sets are all double sided so you can only use an inside or outside disc.
With the T&E 9012 master deluxe 49 piece custom bush, bearing and seal driver kit you have every size you'll ever need, to do the job quickly, professionally and promptly.