Still don't know how to repair and maintain Sinotruk D10B diesel engines? DNT has a look~

Operation precautions:

For the safety and comfort of driving, be sure to perform daily inspections on each component of the diesel engine before use. If any abnormality is found, you can go to the maintenance service station for repair.

Before starting the diesel engine, check whether the oil level, coolant level, etc. meet the requirements to ensure safety.

When starting the diesel engine, if it fails to start within 5 seconds, it should be restarted after 15 seconds. After starting the diesel engine, it should run at idle speed for 2 to 3 minutes, and the oil pressure should be higher than 100kPa. When the coolant temperature is not higher than 60℃, do not suddenly run at high speed and high load, otherwise it will affect the reliability of the diesel engine. Before stopping a loaded diesel engine, the engine must be deloaded and slowed down, and the idling time must be no less than 5 minutes. During the running-in period (3000km), the diesel engine should only be operated under medium load.